This publish could include Amazon or different affiliate links. In case you purchase one thing by means of the link, I may obtain a small commission at no further charge to you.

Did you know you possibly can personalize mesh luggage easily with screen printing? This wouldn’t be possible with vinyl, so one other cause I really like display printing with my Cricut!

I personalized these mesh luggage for a latest trip to the seashore. They have been perfect for hauling towels and toys. I reduce this Sea You on the Beach design on my Cricut. Attached it to my Speedball screen printing body.

Supplies Needed for Screen Printing on Mesh

Screen Printing Frame

Squeegee

Acrylic Screen Printing Ink

Oracal 651 Vinyl

Cricut Maker

Cricut Mat

Cricut TrueControl Knife

My Favorite Transfer Tape

Painter’s Tape

1-Color Screen Printing Press (non-compulsory)

Heat Gun (elective)

- Mesh bag (I found these at Walmart)

Screen Printing with Vinyl

I began screen printing with vinyl after years of utilizing iron-on vinyl (HTV). I made the swap because I wasn’t proud of the best way iron-on vinyl felt on my shirts. Plus, it didn’t hold up nicely. After a number of washes, it will begin to crack and peel off.

I really like that display screen printing is a extra permanent approach to personalize bags and make shirts. That is one of those projects that I wouldn’t have been in a position to do with vinyl, but it is possible with display printing.

If you are new to screen printing together with your Cricut or Silhouette, take a look at my Beginner’s Guide to Screen Printing with Craft Vinyl.

Which Ink Should I take advantage of on industrial filter mesh?

I used Speedball acrylic ink for this challenge. Any such bag would melt if we tried to heat setting, so fabric ink wouldn’t be a good alternative. With acrylic ink, it dries permanent, so the bag can get wet.

I wouldn’t throw this bag in the wash though as acrylic ink doesn’t hold up effectively in a washing machine.

However, if you are display screen printing on mesh shorts or different garments that can withstand the heat of an iron, I'd use Speedball fabric ink. If you loved this short article and you would certainly such as to receive additional details regarding screen printing mesh on sale kindly browse through the site. Don’t overlook to heat set your ink after it dries. Here are 6 Ways to Heat Set Your Fabric Ink.

Easy methods to Screen Print on Mesh Bags

Setup Your Vinyl Cut

I start the process identical to all of my screen printing with vinyl projects. Cut the design on your Cricut or Silhouette vinyl cutting machine. Weed the elements of the design the place you need ink to undergo. This is the opposite of weeding for HTV.

Attach your vinyl to your Speedball display printing frame utilizing switch tape. The type of switch tape you employ can make a giant distinction here on how easily the vinyl sticks to the display screen. If you are having hassle getting the vinyl to follow your body, screen printing mesh on sale try my transfer tape.

Prepare the Mesh Surface

Because the mesh floor has holes, you need to put one thing below to catch the ink that is going to undergo these holes. I used a paper towel inside the pocket of the bag. The paper towels absorbed the ink as it went by means of the holes - stopping it from getting on the inside/back of the bag.

Now, you’re ready to display print! Line up your display screen over the bag. Squeegee ink over the display screen.

The 1-colour display printing press got here in very helpful for this challenge. I used to be in a position to verify my ink coverage. Put the screen back down to add more. With this mesh floor, I wanted to add a number of coats of ink.

You'll be able to do that same process without the press, you’ll just have one shot to get the design lined in ink. When you raise the screen, coustic industrial filter mesh it’s inconceivable to get it again in the precise spot so as to add extra ink.

That’s it! You’ve display printed on mesh! It's possible you'll notice some spots the place the ink filled the small mesh holes. I used a tooth decide to push the ink out of those holes.